Billy Goat F902SPH Owner's Manual
Force blower
Hide thumbs
Also See for F902SPH:
- Owner's manual (23 pages) ,
- General safety and warranty (36 pages) ,
- Owner's manual (17 pages)
Table of Contents
Advertisement
Available languages
Available languages
FORCE SP BLOWER Owner's Manual
FORCE BLOWER Owner's Manual
HOLD DOWN KIT
To secure blower for
transportation on trailer
floors.
P/N 440120
IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE
Part No 440314
Patent #6,253,416 and other patents pending
F902SPH, F1002SPV, F1302SPH, F1802SPV
Beginning Serial #: 110215001
Accessories
SOLID FRONT TIRE
Solid flat-free front tire.
P/N 440279
Original Instructions
PARKING BRAKE
Effective and easy to use to
prevent blower from rolling.
P/N 440140
1
CASTER KIT
For greater maneuverability
on hard surfaces.
P/N 440293
440314_C_LO
Advertisement
Table of Contents
Related Manuals for Billy Goat F902SPH
Summary of Contents for Billy Goat F902SPH
- Page 1 FORCE SP BLOWER Owner’s Manual Patent #6,253,416 and other patents pending FORCE BLOWER Owner's Manual F902SPH, F1002SPV, F1302SPH, F1802SPV Beginning Serial #: 110215001 Accessories HOLD DOWN KIT SOLID FRONT TIRE PARKING BRAKE CASTER KIT To secure blower for Solid flat-free front tire.
-
Page 2: Table Of Contents
FORCE SP BLOWER Owner’s Manual CONTENTS SPECIFICATIONS, SAFETY, AND INSTRUCTION LABELS ENGINE LABELS AND PACKING CHECKLIST ASSEMBLY_________ OPERATION MAINTENANCE TROUBLESHOOTING_______ _____ _____9 MAINTENANCE RECORD____________ ILLUSTRATED PARTS AND PARTS LIST _______________11-13 DECLARATION OF CONFORMITY 14-16 Go to http://www.billygoat.com for French-Canadian translations of the product manuals. Visitez http://www.billygoat.com pour la version canadienne-française des manuels de... -
Page 3: Specifications, Safety, And Instruction Labels
For more information go to www.P65Warnings.ca.gov. INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. For your convenience in ordering replacement labels, part numbers are included in the Illustrated Parts List. -
Page 4: Engine Labels And Packing Checklist
These items should be included in your carton. If any of these parts are missing, contact your dealer. ® Your BILLY GOAT FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag. -
Page 5: Assembly
FORCE SP BLOWER Owner’s Manual ASSEMBLY The hardware for attaching the upper handle to the lower is in the parts bag. Install the upper handle (item 30), to preassembled lower handle (item 28) by sliding the upper handle over and down the outside of the lower handle. Using the bolts (items #36 and #123), washers (item #10) &... -
Page 6: Operation
This type of failure will void the manufacturer’s warranty. BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot control lever to allow the operator to direct the air stream up or down as required to assist in moving debris. -
Page 7: Maintenance
FORCE SP BLOWER Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 100-150 Hours Inspect for worn or damaged parts Check for excessive vibration ... - Page 8 FORCE SP BLOWER Owner’s Manual BELT REPLACEMENT 1. Wait for engine to cool and disconnect spark plug. 2. Follow the impeller removal steps (2-5 on page 8). 3. Remove the four bolts (item #8) holding the back plate (item 4) to the back housing (item #6).
-
Page 9: Troubleshooting
FORCE SP BLOWER Owner’s Manual TROUBLESHOOTING Problem Possible Cause Solution Abnormal vibration Loose or out of balance impeller. Check impeller and replace if required. Debris in impeller. Clear debris with compressed air or a backpack blower (see Fig . 8 and 9 below).* Loose engine. -
Page 10: Maintenance Record
FORCE SP BLOWER Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 440314 440314_C_LO... -
Page 11: Illustrated Parts And Parts List
FORCE SP BLOWER Owner’s Manual FORCE SP PARTS DRAWING Part No 440314 440314_C_LO... - Page 12 FORCE SP BLOWER Owner’s Manual FORCE SP PARTS LIST F1302SPH F902SPH F1002SPV F1802SPV ITEM NO. DESCRIPTION PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. ENGINE 13 HP HONDA GX390 440018 ENGINE 9 HP HONDA GX270 430287...
- Page 13 FORCE SP BLOWER Owner’s Manual FORCE SP PARTS LIST ITEM NO. DESCRIPTION PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. PIN CLEVIS 1/4 X 3/4 440124 440124 440124 440124 HITCH PIN CLIP .051 X 3/4" 440193 440193 440193 440193...
-
Page 14: Declaration Of Conformity
FORCE SP BLOWER Owner’s Manual Руccкий English Suomi Latviešu Slovenščina български език Français Nederlands Slovák Čeština Norsk Ελληνικά Svenska Dansk Hrvatski Polski Türkçe Deutsch Magyar Português Español Italiano Română eesti keel Lietuvių EC Declaration of Conformity Deklaracja zgodności UE Δήλωση συμμόρφωσης ΕΚ Declaração de Conformidade à... - Page 15 91 dB(A) 3.53 kW 7.83 m/s 38.0 kg F902H 110 dB(A) 109 dB(A) 89 dB(A) 6.6 kW 10.3 m/s 64.8 kg F902SPH 110 dB(A) 109 dB(A) 89 dB(A) 6.6 kW 10.3 m/s 68.9 kg F1002V 110 dB(A) 109 dB(A) 93 dB(A) 6.6 kW...
- Page 16 FORCE SP BLOWER Owner’s Manual (1) ISO 5395-1:2013 F.7 (EN 4871:1996) (2) ISO 5395-1:2013 G.8 (EN 12096:1997, D.1) Miejsce produkcji / Osoba odpowiedzialna za Manufacturing Place / Keeper of Documentation Τόπος κατασκευής / Υπεύθυνος τήρησης αρχείων przechowywanie dokumentów Място на производство / Архивар τεκμηρίωσης...
Need help?
Do you have a question about the F902SPH and is the answer not in the manual?
Questions and answers