Billy Goat P / N 440120 Owner's Manual
  1. Manuals
  2. Brands
  3. Billy Goat Manuals
  4. Blower
  5. P / N 440120
  6. Owner's manual
Billy Goat P / N 440120 Owner's Manual

Billy Goat P / N 440120 Owner's Manual

Billy goat force blower owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Accessories
Part No 440021
FORCE BLOWER Owner's Manual
Patent Pending
BILLY GOAT FORCE BLOWER
Owner's Manual
HOLD DOWN KIT
To secure blower for
transportation on
trailer floors.
P/N 440120
PARKING BRAKE
Effective and Easy to
use to prevent blower
from rolling.
P/N 440140
1
Form No F101706A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P / N 440120 and is the answer not in the manual?

Questions and answers

Related Manuals for Billy Goat P / N 440120

Summary of Contents for Billy Goat P / N 440120

  • Page 1 BILLY GOAT FORCE BLOWER Accessories HOLD DOWN KIT To secure blower for transportation on trailer floors. P/N 440120 Part No 440021 FORCE BLOWER Owner’s Manual Patent Pending Owner's Manual PARKING BRAKE Effective and Easy to use to prevent blower from rolling.

  • Page 2: Table Of Contents

    This manual provides complete operating and maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.

  • Page 3: Serial Plate Data And Specifications

    Total Unit Weight: Overall Length: Overall Width Overall Height In compliance with 2000/14/EEC standards Sound at Operator’s ears Vibration at operator position Part No 440021 FORCE BLOWER Owner’s Manual F900S F900H 9.0 HP (6.6kW) 9.0 HP (6.6kW) EX270D50021 GX270K1QA2 SUBARU OHC HONDA OHV 6.4 qt.

  • Page 4: General Safety

    This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT FORCE Blower. This symbol indicates the engine oil level should be checked before operating this equipment.
  • Page 5 FORCE BLOWER Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.

  • Page 6: Sound And Vibration

    FORCE BLOWER Owner’s Manual SOUND Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 5-17- 2006 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

  • Page 7: Instruction Labels

    INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.

  • Page 8: Packing Checklist

    ® Your BILLY GOAT FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag. READ all safety instructions before assembling unit.

  • Page 9: Assembly

    Two ½” open ended wrenches Part No 440021 FORCE BLOWER Owner’s Manual Figure B The throttle control will be attached to the throttle arm on the engine and wrapped around the engine for shipping.

  • Page 10: Operation

    BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther.
  • Page 11 FORCE BLOWER Owner’s Manual ADJUSTING AIR DIRECTOR To adjust air direction, first loosen knob and then position air director cone to desired angle. When the cone is at a suitable position tighten knob to secure. DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity.

  • Page 12: Maintenance

    FORCE BLOWER Owner’s Manual MAINTENANCE ERIODIC AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Inspect for worn or damaged parts. Check for excessive vibration Inspect Impeller for cracks or damage Inspect for loose parts. IMPELLER REMOVAL 1.

  • Page 13: Warranty Claim Procedure

    90 days. The model number and serial number of the unit must be stated in the Warranty Claim. The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. •...

  • Page 14: Illustrated Parts List

    FORCE BLOWER Owner’s Manual ILLUSTRATED PARTS LIST Part No 440021 Form No F101706A...

  • Page 15: Parts List

    LABEL DANGER FLYING DEBRIS GRIP 1-1/4" ID x 13" LABEL FORCE HANDLE ASSY UPPER Key 1/4" SQ x 2.25 Part No 440021 FORCE BLOWER Owner’s Manual F1300H PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. 440018 440011 440009 440010...

  • Page 16: Maintenance Record

    FORCE BLOWER Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 440021 Form No F101706A...

This manual is also suitable for:

P / n 440140440140440279F900sF900hF1300h

Table of Contents

Save PDF