Page 1
Patent #6,253,416 and other patents pending BILLY GOAT FORCE BLOWER Accessories HOLD DOWN KIT To secure blower for transportation on trailer floors. P/N 440120 Part No 440021 FORCE BLOWER Owner’s Manual F901S, F901H, and F1301H Owner's Manual PARKING BRAKE Effective and Easy to use to prevent blower from rolling.
ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.
This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT FORCE Blower. This symbol indicates the engine oil level should be checked before operating this equipment.
Page 5
ALWAYS store fuel in approved safety containers. WARNING: Important Do not run this machine without director cone attached or with improper air director cone. DO NOT run this machine with a cracked or damaged impeller under any circumstances. Part No 440021 Form No F091907A...
FORCE BLOWER Owner’s Manual SOUND LEVEL 90 Db(a) at Operators Position VIBRATION LEVEL 1.05g (10.30m/s Sunny 79.7 F (26.5 1.7 mph (2.8kph) South Southwest 31.2% 29.9Hg (101.25kpa Sunny 86.5 F (30.3 2.5 mph (4.1kph) South Southwest 56.4% 29.9Hg (101.25kpa Form No F091907A...
INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
Hardware-Items #10, #11, #74, and #36 Part No 440021 FORCE BLOWER Owner’s Manual Boxing Parts Checklist Front Air Diverter Item#38 P/N-440045 Handle Upper Assembly Item #30 P/N-440035 Parts Bag & Literature Assy P/N-440020 Honda 9 or 13 hp Subaru 9 hp Form No F091907A...
(item 74) to secure it to the handle as shown making sure that the cable is not rubbing against the tire. is not attached, you will need to One 5/16 open ended wrench Form No F091907A...
Never lift the machine while the engine is running. BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot control lever to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther.
This should allow the diverter to slide into position with more ease. Part No 440021 FORCE BLOWER Owner’s Manual control lever. When you want to blow debris at the same angle for an feature the manual adjustment knob, pictured below, can Manual Adjustment knob Front diverter Form No F091907A...
(step 6). 5. If the impeller does not loosen, obtain a 3/4-16x3” (Billy Goat part #440192) or longer bolt. Thread bolt by hand into nut until bolt rests against the shaft. Tighten the bolt slowly, which will pull the impeller away from the shaft, remove impeller from shaft.