Xi. Appendix; Specifications - Canon imagePROGRAF iPF8400SE Service Manual

XI. Appendix

Note: All specifications are for reference purposes only and are subject to change
without notice.
A.

Specifications

Table 23 – imagePROGRAF iPF8400SE Printer Specifications
Type
Media feed system
Media loading
capacity
Delivery method
Delivery capacity
Cutter
Media width for printing without borders
Max. Media size
Print assurance
area
Printable area
Paper thickness
Detection function
imagePROGRAF iPF8400SE Service Guide
Item
Roll paper
Manual feed (front)
Roll paper: width
Roll paper: length
Cut sheet paper: width
Cut sheet paper: length
Roll paper
Cut sheet paper
Roll paper
Manual feed (front)
imagePROGRAF iPF8400SE Service Guide
Specifications
Bubble jet printer
Roll paper/ Cut sheet (Manual switching)
One (1) roll
Outer diameter: 150mm or less
2 -inch (standard) /3 -inch (standard)
One (1) sheet
Face-up delivery towards the front
One (1) sheet
Automatic horizontal cut (round blade)
Approximately: 10"(254mm), 14"(356mm), 17"(432mm),
24"(610mm), 36"(914mm), 42"(1067mm), 44"(1117.6mm),
B2(20"/515mm), B0(40.5"/1030mm), A1(23"/594mm),
A0(33"/841mm)
Approximately: 44"/1117.6mm
Approximately: 59"/18m (differs depending on OS and
application)
Approximately: 44"/1117.6mm
5',3"/1.6m
Margin of leading edge: 20mm, margin of trailing edge:
5mm,
margin of left and right edges: 5mm
Margin of leading edge: 20mm, margin of trailing edge:
23mm,
margin of left and right edges: 5mm
Margin of leading edge: 5mm, margin of trailing edge:
5mm,
margin of left and right edges: 5mm
[Borderless] Margin of leading edge: 0mm, margin of
trailing edge: 0mm, margin of left and right edges: 0mm
Margin of leading edge: 5mm, margin of trailing edge:
23mm,
margin of left and right edges: 5mm
0.07mm to 0.8mm
No paper, leading edge/trailing edge of paper, paper
width/skew, paper slip, purge motor home position,
carriage position, head existence, remaining amount of
ink, ink tank existence, waste ink full, head overheat,
cover open, roll cassette open/close, mist fan lock, cutter
position, ink supply valve open/close, non-ejection of ink
February 2014
Page 34