Cisco Nexus 7000 Series Configuration Manual page 61

LISP Instance-ID Support
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Configuring a Private LISP Mapping System for LISP Shared Model Virtualization
Command or Action
ip lisp map-resolver ipv6 lisp map-resolver
Example:
switch(config)# ip lisp map-resolver
switch(config)# ipv6 lisp map-resolver
ip lisp map-server ipv6 lisp map-server
Example:
switch(config)# ip lisp map-server
switch(config)# ipv6 lisp map-server
(optional) show running-config lisp
Example:
switch(config)# show running-config lisp
(optional) show [ip | ipv6] lisp
Example:
switch(config)# show ip lisp vrf TRANS
(optional) show [ip | ipv6] lisp map-cache
[vrf vrf-name]
Example:
switch(config)# show ip lisp map-cache
(optional) show [ip | ipv6] lisp database [ vrf
vrf-name]
Example:
The following example shows IPv6 mapping
database information for the VRF named
GOLD.
switch(config)# show ipv6 lisp database
vrf GOLD
(optional) show lisp site [name site-name]
Example:
switch(config)# show lisp site
Purpose
Enables LISP map resolver functionality for
EIDs in the IPv4 address family and in the
IPv6 family..
Enables LISP map server functionality for
EIDs in the IPv4 address family and in the
IPv6 address family..
Displays the LISP configuration on the switch.
The show ip lisp and show ipv6 lisp
commands display the operational status of
LISP as configured on the switch, as applicable
to the IPv4 and IPv6 address families
respectively.
The show ip lisp map-cache and show ipv6
lisp map-cache commands display the
operational status of the map cache on a switch
configured as an ITR or PITR, as applicable
to the IPv4 and IPv6 address families
respectively.
The show ip lisp database and show ipv6 lisp
database commands display the operational
status of the database mapping on a switch
configured as an ETR, as applicable to the IPv4
and IPv6 address families respectively.
The show lisp site command displays the
operational status of LISP sites, as configured
on a map server. This command only applies
to a switch configured as a map server.
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
49