Configuring Lisp-Alt Functionality - Cisco Nexus 7000 Series Configuration Manual

Configuring Locator ID Separation Protocol
Step 8
Step 9
Related Topics

Configuring LISP-ALT Functionality

You can enable and configure LISP-ALT (ALT) functionality for both IPv4 and IPv6 address families.
Procedure
Step 1
Step 2
Step 3
Step 4
Command or Action
Example:
switch(config)# lisp loc-reach-algorithm
rloc-probing
exit
Example:
switch(config)# exit
switch#
(Optional) show {ip|ipv6} lisp
Example:
switch# show ip lisp
Example:
switch# show ipv6 lisp
Configuring LISP ITR/ETR (xTR)
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
{ip | ipv6} lisp alt-vrf vrf-name
Example:
switch(config)# ip lisp alt-vrf lisp
Example:
switch(config)# ipv6 lisp alt-vrf lisp
exit
Example:
switch(config)# exit
switch#
(Optional) show {ip | ipv6} lisp
Example:
switch# show ip lisp
Purpose
default, all locator reachability algorithms are
disabled.
Exits global configuration mode.
Displays all configured IPv4 or IPv6 LISP
configuration parameters.
, on page 7
Purpose
Enters global configuration mode.
Configures LISP to use the LISP-ALT VRF
vrf-name.
Exits global configuration mode.
Displays all configured IPv4 or IPv6 LISP
configuration parameters.
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
Configuring LISP-ALT Functionality
11