Configuring LISP Extranets
Verifying LISP Local Extranets
Use the following show command to verify the LISP local Extranet policy configurations.
Procedure
show ip lisp database vrf vrf-name
Displays Locator ID Separation Protocol (LISP) Egress Tunnel Router (ETR) configured local IPv4 EID
prefixes and associated locator sets for a VRF.
xTR3 verifications:
switch# show ip lisp database vrf VRF3
LISP ETR IP Mapping Database for VRF "VRF3" (iid 300), global LSBs: 0x00000001
Local Database: 2
EID-prefix: 10.3.0.0/16, instance-id: 300, LSBs: 0x00000001
Producer: static , locator_set: Reserved-0, uptime: 19:11:25
Locator: 10.10.10.3, priority: 1, weight: 100
EID-prefix: 10.4.0.0/16, instance-id: 400, LSBs: 0x00000001
Producer: leaked , locator_set: , uptime: 19:11:25
switch# show ip lisp database vrf VRF4
LISP ETR IP Mapping Database for VRF "VRF4" (iid 400), global LSBs: 0x00000001
Local Database: 2
EID-prefix: 10.3.0.0/16, instance-id: 300, LSBs: 0x00000001
Producer: leaked , locator_set: , uptime: 19:11:25
EID-prefix: 10.4.0.0/16, instance-id: 400, LSBs: 0x00000001
Producer: static , locator_set: Reserved-0, uptime: 19:11:25
Locator: 10.10.10.3, priority: 1, weight: 100
switch# show ip route vrf VRF3
IP Route Table for VRF "VRF3"
10.3.0.0/16, ubest/mbest: 1/0 time, attached
10.4.0.0/16, ubest/mbest: 1/0 time
switch# show ip route vrf VRF4
IP Route Table for VRF "VRF4"
10.3.0.0/16, ubest/mbest: 1/0 time
10.4.0.0/16, ubest/mbest: 1/0 time, attached
Uptime: 19:11:25, state: up, local
Uptime: 19:11:25, state: up, local
*via 10.3.0.1, Vlan300, [0/0], 00:49:27, direct
*via 10.4.0.1%VRF4, Vlan400, [10/1], 00:49:27, lisp, eid
*via 10.3.0.1%VRF3, Vlan300, [10/1], 00:49:27, lisp, eid
*via 10.4.0.1, Vlan400, [0/0], 00:49:27, direct
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
Verifying LISP Local Extranets
113