Cisco Nexus 7000 Series Configuration Manual page 70

Configuring a Remote Site for Large-Scale LISP Shared Model Virtualization
Figure 16: Large Scale LISP Site with Virtualized IPv4 EIDs and a Shared IPv4 Core
The components illustrated in the topology shown in the figure above are described below:
• LISP remote sites:
• Each customer premises equipment (CPE) switch at a remote site functions as a LISP ITR and ETR
• Each LISP xTR has the same three VRFs as the HQ Site: the TRANS (for transactions), the SOC
• Each remote site LISP xTR has a single RLOC connection to a shared IPv4 core network.
Before you begin
Create the VRFs using the vrf definition command and verify that the Configure a Large-Scale LISP Shared
Model Virtualization task has been performed at one or more central (headquarters) sites.
Procedure
Step 1
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
58
(xTR).
(for security operations), and the FIN (for financials). Each VRF contains only IPv4 EID-prefixes.
Command or Action
configure terminal
Example:
Switch# configure terminal
LISP Instance-ID Support
Purpose
Enters global configuration mode.