Figure 4-6 Us Process Point Building Display - Honeywell FSC-SM Installation Manual

4.3 Configuration at TPS Universal Station,
Process Point
Building display
Figure 4-6 – US Process Point Building display
MENU
NIM BUILD TYPE SELECT MENU
NIM PROCESS POINT BUILD TYPE
F1=PED
F2=RECALL DISP
56
You must once again return to the NIM Build Type Select Menu to access
the FSC-SMM data point building displays. To do this, press the [F1 PED]
key.
Select the PROCESS POINT BUILDING target, once you have returned
to the NIM Build Type Select Menu. Figure 4-6 shows the display which
will be brought up.
F3= F5=OVERWRITE
F4= F6=
FSC Safety Manager Installation Guide
ANALOG ANALOG
INPUT OUTPUT
DIGITAL DIGITAL
INPUT OUTPUT
REGULATORY REGULATORY
PV CONTROL
LOGIC
FLAG
ARRAY
PROCESS
MODULE
F7=RECON
F8=PED STATUS
Continued
11 Jun 97 14:05:00
PAGE 01 OF 01
DIGITAL
COMPOSITE
TIMER NUMERIC
DEVICE
CONTROL
F9 =WLK BACK
F10=WRITE
Continued on next page
3
F11=
F12=LOAD
10/01