Equipment Warehousing - Honeywell FSC-SM Installation Manual

1.2

Equipment Warehousing

Factory packing
Transit/warehousing
specifications
2
For shipment, the FSC Safety Manager is packed with desiccant packages,
wrapped in a moisture barrier and optionally enclosed for shipment as
required by the user.
The FSC Safety Manager can be shipped by a variety of means, but any
trucking should be done by enclosed air-ride vans. The equipment is
usually trucked on the final leg of the journey to the user warehouse or
site. There it is stored off the ground on a solid piece or combination of
lumber pieces (minimum height 10 cm / 4 in) and indoors until needed for
installation. During the whole process, the environment must be
monitored and corrected if the following equipment transit/storage ratings
are exceeded:
• Temperature range:
• Relative humidity:
• Vibration:
• Shock:
In order to minimize exposure to humidity, keep the
ATTENTION
factory wrapping intact during storage and transit. If it is necessary to
unseal the equipment for customs or receiving, add more desiccant and
reseal the package.
FSC Safety Manager Installation Guide
–20°C to +70°C (–4°F to +158°F)
5% to 95%, non-condensing
1 G, frequency 10-150 Hz (IEC 68-2-6)
15 G for 11 ms (IEC 68-2-27)
10/01