Table 4-2 Ucn Configuration - Honeywell FSC-SM Installation Manual

4.3 Configuration at TPS Universal Station,
UCN configuration
50
Once you have completed the start-up process for the US, follow the steps
outlined in Table 4-2.
Table 4-2 – UCN configuration
Step
Press the RESET button.
1
ATTENTION The RESET button is located under the black metal
panel at the top of the operator keyboard.
Press the LOAD button on the operator keyboard. The system will
2
state 'Loading in progress'.
3 A prompt will appear: "N, 1, 2, 3, 4?". Press
and press the <Enter> key.
4 Another prompt will appear: "OPR, UNP, X?". Press
Universal Personality and press the <Enter> key.
FSC Safety Manager Installation Guide
Continued
Action
N
Continued on next page
for Network
U
for
10/01