Figure 1-12 Eyebolt Crane Method - Honeywell FSC-SM Installation Manual

1.4 Unpacking and Placement,
Crane method
Leveling and
bolt-down
10/01
In this method the cabinet is lifted into place with a crane. Use either an
angle iron transport skid (see Figure 1-12) or the lifting eyebolts installed
on each cabinet (see Figure 1-13).
Figure 1-13 – Eyebolt crane method
x x
One
bay
x x
x
Two
bays
x
x
Three
bays
x
x
Four
bays
x
FSC Safety Manager cabinets do not include levelers; it may be necessary
to hand-fit shims underneath the cabinet in order to make the cabinet sit
solidly.
The FSC-SM cabinet has four holes in the bottom for bolting it to a floor.
A partially filled cabinet should be bolted down. Cabinets that are bolted
together are not easily moved and do not ordinarily require bolting down.
Refer to Figure 1-2 for bolt-down dimensions.
FSC Safety Manager Installation Guide
Continued
x
x
x
x
x
x
19