Honeywell FSC-SM Installation Manual page 58

3.3 Module Configuration,
Central Parts
I/O modules
46
The Central Parts can only function correctly if they are properly
configured, which can be done using the FSC user software (FSC
Development System or FSC Navigator). A Central Part (CP) includes
several standard items such as the redundant power supplies, the
watchdog module and the central processing unit (CPU). It also has a
number of free slots in which can be installed:
• communication modules (such as the FSC-SMM),
• diagnostic and battery module (DBM), and
• several vertical bus drivers (VBDs).
For detailed information on Central Part requirements and
configuration, refer to the FSC Hardware Manual and the FSC Software
Manual.
The allocation of I/O modules within an FSC system and their
configuration requirements depend on the safety application and on the
FSC system configuration. Use the FSC user software to allocate I/O
modules and to enter their safety relation values.
For detailed information on I/O module requirements and
configuration, refer to the FSC Hardware Manual and the FSC Software
Manual.
FSC Safety Manager Installation Guide
Continued
10/01