Configuration At Fsc User Station - Honeywell FSC-SM Installation Manual

4.2

Configuration at FSC User Station

Functional Logic
Diagrams (FLDs)
programming
FSC user software
configuration
48
Functional Logic Diagrams (FLDs) define the control program for the
safety application. They are created using the FSC user software:
FSC Development System (R42x) or FSC Navigator (R5xx, R600).
For detailed information on FSC Functional Logic Diagrams
programming, refer to the FSC Software Manual.
The FSC user software is used to define and configure the safety
application. There are several things that need to be configured before the
FSC-SM can function properly in the TPS system. The definition and
configuration process consists of the following steps:
• defining the hardware configuration of the FSC-SM,
• defining the variables (which includes assigning attributes to them and
allocating them to system components),
• allocating system memory for the FSC-SMM,
• assigning a UCN address to the FSC-SMM,
• assigning DCS addresses to the variables,
• compiling the application, and
• transferring the application to the FSC system (either to EPROMs or by
downloading it to the system).
For detailed information on the software configuration of
FSC-SM, refer to the FSC Software Manual.
FSC Safety Manager Installation Guide 10/01