Figure 4-2 Us Engineering Main Menu Display - Honeywell FSC-SM Installation Manual

4.3 Configuration at TPS Universal Station,
Engineering Main
Menu display
Figure 4-2 – US Engineering Main Menu display
UNIT NAMES
AREA NAMES
CONSOLE NAMES
LCN NODES
SYSTEM WIDE VALUES
VOLUME CONFIGURATION
COMMAND
PROCESSOR
SUPPORT
UTILITIES
52
In order to configure your UCN, you will need to bring up the Engineering
Main Menu display. To do this, hold the [CTRL] key on the engineering
keyboard and press the [HELP(M)] key. Figure 4-2 shows this display.
Once you have brought this display up, select the NETWORK
INTERFACE MODULE target.
ENGINEERING MAIN MENU
HIWAY GATEWAY
LOGIC BLOCKS
APPLICATION MODULE
COMPUTING MODULE
NETWORK INTERFACE
BUILDER COMMANDS
Support Functions and Utility Programs
SYSTEM MENU SYSTEM STATUS
SMCC/
MAINTENANCE
FSC Safety Manager Installation Guide
MODULE
CONSOLE STATUS
R530 (C) HONEYWELL INC., 1984-97
Continued
11 Jun 97 14:05:00
PICTURE EDITOR
FREE FORMAT LOGS
BUTTON CONFIGURATION
HM HISTORY GROUPS
DOCUMENTATION TOOL
AREA DATA BASE
Continued on next page
3
10/01