Table of Contents
Advertisement
4.1 Ceiling Mounted Version (EXCELC)
4.1.1 Considerations
The procedures below are detailed to a high level however
please consult a qualified electrician.
Minimum Room
Requirements
Maximum Room
Requirements
Live Electric
Circuitry
Heavy or Difficult
fittings
Existing
Environmental
Factors
Environmental
Responsibility
The ceiling mounted version of the EXCEL has a
recommended install height where the bottom of the wall
bracket is approximately 1900mm from the floor.
When cutting the downtube to the required height you will
need to account for the ceiling plate clamp and leave a gap
between the plate and the ceiling for the cable flow.
The maximum fixing height available with a 1m downtube is
approximately 2900mm from the floor. For ceiling heights
above this a 2m downtube may be required.
For lights being installed into suspended ceiling area's a uni-
strut platform can be used to bring the fixing point down.
All personnel working around live circuitry should be qualified
and following proper procedures
Fitting the ceiling plate can be difficult and aspects of the
fitting may require more than one person; this work should
only be attempted by appropriate and competent personnel.
When fitting, considerations have to be taken for existing
services such as; fire alarms, vents, lights, etc. along with
interior ceiling construction and any surrounding hazard.
Once our products are installed all packaging should be
disposed of appropriately and recycled where appropriate
and in accordance with local governing regulations.
If in doubt
Page 13 of 35
Advertisement
Table of Contents
