Operating Modes - ICM Controls SC 3006 Installation, Operation & Application Manual

There are five possible operating modes for the SC3006. Off, Cool, Heat, and Cool & Heat modes are
accessed by pressing the Mode button. Program mode is accessed by pressing the Prog button.
OFF Mode
• In this mode, the thermostat will not turn on the heating or cooling devices
Note: The indoor fan can be turned on manually in every operating mode by
sliding the auto/on switch to ON.
Cool Mode
• In this mode, the thermostat controls the cooling system
Note: There is a four minute delay for your compressor to restart after it has
turned off.
Heat Mode
• In this mode, the thermostat controls the heating system
Note: For heat pumps, there is a four minute delay for your compressor to
restart after it has turned off.
Cool and Heat Mode (Auto Changeover)
• In this mode, the thermostat controls the cooling and heating systems,
automatically changing over from one to the other as needed
Program Mode
• In this mode, the program function is on (PROG displays), and the thermostat
will automatically be controlled by the set program schedule. Program mode can
function with heat mode, cool mode or heat & cool mode. The program schedule
can be overridden by changing the set temperature ( or button). After 2
hours, the program schedule will automatically be resumed. To manually
return to the program schedule, press the button twice.

Operating Modes