Operating.modes - ICM Controls SC 3801 Installation, Operation & Application Manual

Program Overview
OFF Mode
.
In.this.mode,.the.thermostat.will.not.turn.on.the.heating.or.cooling.devices.
. Note 1:.The.indoor.fan.can.be.turned.on.manually.in.every.operating.mode.by.sliding.the.
.
Auto/On.switch.to.ON.
. . Note 2:.To.enter.Programming.Fan.Only.Mode,.press.the. .button.once..Only.the.indoor.
fan.will.operate.during.that.period.if.it.is.activated.in.the.program.setup.
Cool Mode
.
In.this.mode,.the.thermostat.controls.the.cooling.system..
. .Note:.There.is.a.four-minute.delay.for.your.compressor.to.restart.after.it.has.turned.off.
Heat Mode
.
In.this.mode,.the.thermostat.controls.the.heating.system..
. . Note:.For.heat.pumps,.there.is.a.four-minute.delay.for.your.compressor.to.restart.after.it.
has.turned.off.
Emergency Heat Mode (Heat.pump.systems.only)
In.this.mode,.heat.pump.system.will.be.bypassed.and.auxiliary.heat.becomes.first.stage.heat.
. . Note:. Enter.Emergency.Heat.from.non-program.heat.mode.by.pressing.the. .button.for.
10.seconds.
. . Note:. Exit.Emergency.Heat.by.pressing.the. .button.for.10.seconds.
Cool and Heat Mode
The.thermostat.controls.the.heating.and.cooling.systems,.automatically.changing.over.from.one.to.
the.other.as.required.
Operating.modes.continued.on.Page.26
Operating Modes
These.are.the.possible.operating.modes.for.the.SC3801
.
.