Maintenance - Mira Advance ATL Thermostatic Installation & User Manual

user Maintenance - handset Cleaning
Tradesperson Maintenance - Inlet Filter Cleaning/Replacing
read the section "Important safety Information" first.
1.
electrical and water
supplies to the appliance
are turned off.
3.
Hold a wrench across the flats of the
metal connector. Unscrew the filter
using another wrench as shown. clean
or replace the Filter as necessary. Refit
the Filter making sure it is screwed
fully home. Do not overtighten.

MAInTenAnCe

clean with mild washing up detergent or
soap solution. Wipe dry with soft cloth.
poor shower performance can be avoided
by cleaning the spray plate. Use thumb
or soft cloth to wipe rubber nozzles. The
handset shall be descaled regularly to stop
the handset getting blocked.
2.
remove the cover screw, cover and
Splash Guard. disconnect the ribbon
cable from the cover
4.
Make sure all plumbing connections
are sealed before restoring the water
supply. Re-prime the appliance (refer
to "Installation") before restoring the
electricity supply. refit the Splash
Guard, ribbon cable and cover.
26