Storing The Memory Presets (Memory Control Model Only); Automatic Shut Down - Mira Advance ATL Thermostatic Installation & User Manual

5.
push start/stop BeFoRe isolating
the electricity. The flashing light
indicates the shower is shutting down.
7.
residual water may drain
over a few minutes

3. storing the Memory Presets (Memory Control Model only)

1.
+
_
Set the shower to the desired
temperature and flow.
3.
To retrieve a stored setting, push
the desired memory button when
the shower is either on or off.
note! The unit has a built in "Shower Stop" timer function to protect from accidental
unattended operation. This feature automatically switches the unit off after
40 minutes of continuous use. normal operation is restored by re-selecting the
start/stop button.
Any light flashing rapidly will indicate the button pushed is stuck.
6.
The shower will purge water from
its tank for a few seconds.
2.
push and hold down the desired memory
button. A "beep" and flashing light will
indicate the setting has been stored
successfully.
20