Fiat 500 Owner's Handbook Manual page 57

BONNET
GETTING TO
KNOW YOUR
OPENING
CAR
Proceed as follows:
❒ pull lever A fig. 59 in the direction indicated by the
SAFETY
arrow
❒ move the lever B fig. 60 to the right as shown in
the figure
STARTING AND ❒ lift the bonnet and, at the same time, release the
DRIVING
supporting rod C fig. 61 from its catch D, then
insert the end of the rod into housing E in the
bonnet (larger hole) and push to safety position
WARNING
(smaller hole), as shown in the figure.
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 59
56
The bonnet may drop suddenly if the
supporting rod is not positioned
properly. Only perform these operations when
the car is stationary.
fig. 60
fig. 61
F0S0045
WARNING
F0S0046
F0S0047