Fiat 500 Owner's Handbook Manual page 126

without scraping your hand against the ground.
The moving components of the jack (screws and
joints) can also cause injuries: avoid touching them.
If you become soiled with the lubricating grease,
wash it off thoroughly;
❒ make sure the contact surfaces between
space-saver wheel and hub are clean so that the
fastening bolts will not come loose;
❒ fit the space-saver wheel making pin N fig. 100
coincide with one of the wheel holes O fig. 100;
❒ fasten the four fastening bolts;
❒ turn the jack handle to lower the car and remove
the jack;
❒ fasten the bolts completely, working in a
criss-cross fashion as shown in fig. 101.
G F
fig. 99
I
H
F0S0129
REFITTING THE STANDARD WHEEL
Following the procedure described previously, raise
the car and remove the space saver spare wheel.
Versions with steel rims
Proceed as follows:
fig. 100
fig. 101
GETTING TO
KNOW YOUR
CAR
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
F0S0130
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0S0131
125