Fiat 500 Owner's Handbook Manual page 20

❒ press + or – to set the value;
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen without storing.
Button volume (Adjusting the button volume)
This function may be used to adjust (over 8 levels)
the volume of the noise made when the MENU ESC,
+ and – buttons are pressed.
To set the desired volume, proceed as follows:
❒ briefly press MENU ESC: the previously set
volume level will flash on the display;
❒ press + or – to set the value;
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen without storing.
Belt buzzer (Buzzer activation for S.B.R.
indication)
This function can only be displayed after a Fiat
Dealership has deactivated the SBR system (see "SBR
system" in the "Safety" section).
Service (Scheduled servicing)
Using this function you can display information about
the mileage intervals for car servicing.
To consult this display, proceed as follows:
❒ briefly press the MENU ESC button, which makes
the display show the service interval in km or mi
according to the previous setting (see "Distance
units of measurement" paragraph);
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen.
Note The "Scheduled Servicing Plan" requires the
vehicle to be serviced every 30,000 km (or 18,000
miles). This is automatically displayed, when the
ignition key is turned to MAR, from 2,000 km (or the
equivalent in miles) and reappears every 200 km (or
the equivalent in miles). Below 200 km servicing
indications are more frequent. The display will be in
kilometres or miles depending on the measurement
unit settings. When the next scheduled service is
approaching and the key is turned to MAR, the word
Service will appear on the display, followed by the
number of kilometres or miles left. Go to a Fiat
Dealership, where the "Scheduled Servicing Plan"
operations will be performed and the message will
be reset.
Passenger air bag (Activation/deactivation of
passenger-side front air bag and side bag to
protect chest/pelvis area)
(*) For versions/markets where provided
This function is used to activate/deactivate the front
passenger's airbag.
Proceed as follows:
GETTING TO
KNOW YOUR
CAR
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
19