Fiat 500 Owner's Handbook Manual page 137

Side
GETTING TO
KNOW YOUR
CAR
The intervention must be carried out
taking all precautions necessary to avoid
damaging the bodywork (use a sufficiently
SAFETY
rigid and appropriately thick plastic card).
To change the bulb, proceed as follows:
❒ lever the lens off, by initially applying force from
STARTING AND
the front towards the back (1 - fig. 112);
DRIVING
❒ then lever in the opposite direction, by applying
force from the back part (2 - fig. 112) and remove
unit B;
WARNING
LIGHTS AND
❒ turn the bulb holder anticlockwise, extract the
MESSAGES
clipped bulb and replace;
❒ refit the bulb holder in the lens, then position unit
B, ensuring that the fastening clip clicks into place.
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 111
136
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ press the fastener A fig. 113 and remove the bulb
holder;
❒ remove the pressure-fitted bulb and replace it;
❒ refit the cap locking it correctly;
❒ refit the rubber cap.
fig. 112
F0S0052 F0S0355