Fiat 500 Owner's Handbook Manual page 132

CYLINDER REPLACEMENT PROCEDURE
To replace the bottle, proceed as follows:
❒ disconnect connection A fig. 108;
❒ turn the cylinder to be replaced anticlockwise and
raise it;
❒ fit the new cylinder and turn it clockwise;
❒ connect connection A to the cylinder and insert
the transparent tube B fig. 108 into its housing.
fig. 108
CHANGING A BULB
GENERAL INSTRUCTIONS
❒ Before changing a bulb check the contacts for
oxidation;
❒ Burnt bulbs must be replaced by others of the
same type and power;
❒ always check the headlight beam direction after
changing a bulb;
❒ when a light is not working, check that the
corresponding fuse is intact before changing a bulb.
For the location of fuses, refer to the paragraph
"If a fuse blows" in this section;
Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
Halogen bulbs contain pressurised gas,
in the case of breakage they may burst.
F0S0125
WARNING
WARNING
GETTING TO
KNOW YOUR
CAR
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
131