Fiat 500 Owner's Handbook Manual page 141

CHANGING AN INTERIOR LIGHT
GETTING TO
KNOW YOUR
For the type of bulb and power rating, see "Changing
CAR
a bulb".
PLAFONIERA INTERNA
SAFETY
To change the bulbs, proceed as follows:
❒ using the screwdriver provided, extract the roof
light A fig. 120 working in the point shown by
STARTING AND
the arrow;
DRIVING
❒ open the cover fig. 121 as indicated;
❒ replace the bulb C fig. 121 releasing the side
WARNING
contacts, insert the new bulb and make sure that it
LIGHTS AND
is correctly locked between the contacts;
MESSAGES
❒ close the cover and refit the lens.
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 120
140
BOOT LIGHT
(for versions/markets, where provided)
To change the bulbs, proceed as follows:
❒ open the tailgate;
❒ using the screwdriver provided, extract the ceiling
light A fig. 122 working in the point shown;
❒ open the bulb cover B fig. 123 and replace the
pressure-fitted bulb C fig. 123;
❒ refit the cover B on the lens;
❒ refit the roof light correctly by pressing one side
and then the other until the locking click is heard.
fig. 121
F0S0060 F0S0356