Fiat 500 Owner's Handbook Manual page 25

BACKREST FOLDING
GETTING TO
To fold the backrest over, adjust lever D fig. 19
KNOW YOUR
(movement 1) and push the backrest forwards until it
CAR
locks (movement 2); release lever D and, pushing
the backrest, slide the seat forwards (movement 3).
SAFETY
DRIVER AND PASSENGER SIDES WITH
POSITION MEMORY
(for versions/markets, where provided)
STARTING AND
To restore the seat to its original position, slide the
DRIVING
seat backwards pushing the backrest until the seat
locks (movement 4), adjust lever D fig. 19
(movement 5) and raise the backrest (movement 6)
WARNING
until the locking can be heard.
LIGHTS AND
MESSAGES
IMPORTANT Using lever D fig. 19 before locking the
seat in its original position will cause the initial seat
position to be lost. In this case the position of the
IN AN
seat must be restored through lengthwise adjustment
EMERGENCY
A fig. 16.
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 18
24
PASSENGER SIDE WITHOUT POSITION
MEMORY
To restore the seat to its original position, slide the
seat backwards pushing the backrest until the desired
position is reached (movement 4), adjust lever D
fig. 19 (movement 5) and raise the backrest
(movement 6) until the locking can be heard.
The type of reattachment manoeuvre has been
chosen to guarantee the safety of the occupant. If an
obstacle is present (e.g. a bag) and the seat cannot
be returned to its original position, the mechanism
reattaches the seat only positioning the backrest
to ensure that the guides are always locked.
fig. 19
F0S0015 F0S0154