Fiat 500 Owner's Handbook Manual page 138

With gas discharge bulbs (Xenon)
(for versions/markets where provided)
WARNING
Due to the high power supply voltage,
gas discharge bulbs (Xenon) should only
be replaced by specialised personnel: danger of
death! Go to a Fiat Dealership.
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ release the two bulb holding clips A fig. 114;
❒ extract the bulb and replace it;
fig. 113
❒ fit the new bulb, making the outline of the metallic
part coincide with the grooves on the reflector,
then reattach the bulb holding clips;
❒ refit the rubber cap.
SIDE LIGHTS/DAY LIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ turn the bulb holder B fig. 114 anticlockwise and
remove it;
❒ remove the pressure-fitted bulb and replace it;
❒ refit the bulb holder B by turning it clockwise and
locking it correctly;
❒ refit the rubber cap.
fig. 114
F0S0053
GETTING TO
KNOW YOUR
CAR
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0S0054
137