Fiat 500 Owner's Handbook Manual page 19

Unit of measurement (Setting the unit of
GETTING TO
measurement)
KNOW YOUR
With this function it is possible to set the units
CAR
through three submenus: "Distances",
"Consumption" and "Temperature".
SAFETY To set the required unit proceed as follows:
❒ briefly press the MENU ESC button, displaying
three submenus;
❒ press button + or – to browse the three
STARTING AND
sub-menus;
DRIVING
❒ once the submenu to be modified has been
selected, briefly press the MENU ESC button;
WARNING
❒ when you select "Distances", briefly pressing
LIGHTS AND
MENU ESC makes the display show "km" or "mi"
MESSAGES
depending on the previous setting;
❒ press button + or – to set;
IN AN
❒ when you select "Consumption", briefly pressing
EMERGENCY
MENU ESC makes km/l, l/100km or mpg appear
on the display depending on the previous setting;
SERVICING AND If the set distance unit is "km", the fuel consumption
MAINTENANCE unit will be displayed in km/l or l/100 km.
If the distance unit set is "mi" the fuel consumption
unit will be displayed in "mpg".
TECHNICAL
❒ press button + or – to set;
SPECIFICATIONS
❒ when you select "Temperature", pressing MENU
ESC makes °C or °F appear on the display
depending on the previous setting;
INDEX
❒ press button + or – to set;
18
When you have made the required adjustments,
briefly press button MENU ESC to go back to the
submenu screen or hold the button down to go back
to the main menu screen without saving.
❒ again, give the MENU ESC button a long press to
return to the standard screen or to the main
menu according to the position in the menu.
Language (Language selection)
Display messages can be shown in different
languages: Italian, English, German, Portuguese,
Spanish, French, Dutch and Polish.
To set the desired language, proceed as follows:
❒ briefly press MENU ESC: the previously set
"language" will flash on the display;
❒ press button + or – to set;
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen without storing.
Warnings volume (Adjusting the alert/warning
acoustic signal volume)
With this function the volume of the buzzer which
accompanies the display of any failure/warning can be
adjusted according to 8 levels.
To set the desired volume, proceed as follows:
❒ briefly press MENU ESC: the previously set
volume level will flash on the display;