Fiat 500 Owner's Handbook Manual page 125

❒ take out the tool box C fig. 97 and place it next to
GETTING TO
the wheel to be changed;
KNOW YOUR
❒ take the space-saver wheel D fig. 97;
CAR
❒ use the provided screwdriver to remove the hub
cap, levering the dedicated opening on the outer
edge;
SAFETY
❒ for cars fitted with alloy wheels, remove the
press-fitted hub cap using the screwdriver
provided;
STARTING AND
❒ loosen the retaining bolts for the wheel to be
DRIVING
changed by about one turn using the spanner
provided E fig. 98;
WARNING
❒ turn the jack handle to partially open it fig. 99;
LIGHTS AND
❒ position the jack near the wheel to be repaired at
MESSAGES
the reference point on the side member;
❒ extend the jack until groove F fig. 99 on the jack
IN AN
fits correctly into ridge G fig. 99 underneath the
EMERGENCY
side member;
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 96
124
❒ alert other passengers that the car is about to be
raised; all persons should be kept away from the
car until it has been lowered;
❒ fit the handle H fig. 99 to operate the jack device I
fig. 99 and raise the car until the wheel is a few
centimetres from the ground. When turning
the jack handle make sure that it can turn freely
C
fig. 97
fig. 98
F0S0126
B
D
F0S0127
F0S0128