Figure 4-3 Write Analog Parameter Message Exchange Example - Honeywell UDC2300 Product Manual

4.5 Write Analog Parameters,
Example
Figure 4-3 Write Analog Parameter Message Exchange Example
request
Address
Protocol Format (without checksum)
UDC State and Mode
6 = slave, no change
5 = configuration, write
Data Type Code for Analog
Identifying Code for Gain
Gain Value of 10
busy response
ready request
is ready response
Request message received successfully
UDC functioning properly and performed operation
Control state, Automatic LSP Mode
No Alarm
(OPTIONAL) Do a READ operation for Code 001 to verify change to 10.
10/00 RS422/485 ASCII Communications Option Product Manual
Figure 4-3 is an example of a Write of an analog parameters message
exchange; specifically to change the gain value from 5 to 10; analog I.D.
code 001.
Continued
03 , 0204 , 65 , 18 ,
00 82 00
03,0204,66,11, 0 CR LF
001 , 010.0 , CR LF
00 80 4 0 CR LF
23095
49