Reading Or Changing The Output - Udc2300; Table 5-10 Reading Or Changing The Output; Table 5-11 Associated Output Codes; Reading Or Changing The Output - Honeywell UDC2300 Product Manual

5.8

Reading or Changing the Output - UDC2300

Overview
I.D. codes
Associated
parameters
10/00 RS422/485 ASCII Communications Option Product Manual
You can read the output of a particular UDC controller (Read transaction)
or you can change it to suit your needs. (Do a Write transaction.)
Use the identifying code in Table 5-10 to monitor (Read) or change (Write
the output (in manual only).
To Write (change) the output, the controller must first be in manual mode.
Table 5-10

Reading or Changing the Output

Parameter
Description
Output 123
Refer to Table 5-11 for the codes required to display or change any of the
parameters associated with the output.
Table 5-11 Associated Output Codes
Parameter
Output Limits
Failsafe Output Values
Output Deadband
Output Hysteresis
Output Type
Identifying Format
Code Code
18
Range or Selection
–5 % to +105 % of full
span (current output)
0 % to 100 % (relay type
output)
Code
014, 015
040
018
019
160
63