5.9
Local Setpoint/PID Selection /Setpoint Ramp Status -
UDC2300,
Write
66
RS422/485 ASCII Communications Option Product Manual
Continued
A write of code 250 lets you change the SP ramp status as well as the local
setpoint or tuning set selection. Refer to Table 5-13.
Table 5-13 I.D. Code 250 Writes
Parameter
Identifying
Description
Code
Write
250
Local
Setpoint/PID
Set Selection
and SP Ramp
Status
To enable or disable the setpoint ramp, refer to Identifying code 150.
Format
Range or Selection
Code
11
000 = Abort SP Ramp
001 = Run SP Ramp
002 = Hold SP Ramp
003 = Start SP Ramp
004 = Change to Local Setpoint #1
005 = Change to Local Setpoint #2
006 = Change to PID Tuning Set #1
007 = Change to PID Tuning Set #2
10/00