Selecting Controllers From A Display Other Than Control Assign - Yamaha MODX7 Reference Manual

Reference
Performance
 Selecting Controllers from a display other than Control Assign
While displays other than the Control Assign display are shown, you can select controllers using the
[CONTROL ASSIGN] button on the panel. When the cursor is on the parameter that can be set as a
Destination, the [CONTROL ASSIGN] button on the panel lights up. Press the [CONTROL ASSIGN] button
while the button is lit, and the Destination Parameter display appears. Move the controller on the panel or
touch a number shown on the display to select a Source. The Control Assign display then appears with the
Source selected in the Destination Parameter display set as the Source.
Motion Sequencer Lane
NOTE An error message appears when you move the Super knob and there are no more Assignable Knobs available
for assigning a Source.
MODX Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Envelope Follower
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
104