Effect Block; Effect Structure; Insertion Effects; Master Effect - Yamaha MODX7 Reference Manual

Effect Block

This block applies effects to the output of the tone generator block as well as audio input block,
processing and enhancing the sound. Effects are applied in the final stages of editing, letting you change
the sound as desired.

Effect structure

System Effects—Variation and Reverb
System Effects are applied to the overall sound. With System Effects, the sound of each Part is sent to the
effect according to the Effect Send Level for each Part. The processed sound (referred to as "wet") is sent
back to the mixer according to the Return Level, and output—after being mixed with the unprocessed
"dry" sound. This instrument is equipped with Variation and Reverb as System Effects. In addition, you can
set the Send Level from Variation to Reverb. This parameter is used to apply Reverb to the signals output
from the Variation. You can get a natural effect by applying Reverb depth to the Variation sound with the
same level as that of the dry sound.

Insertion Effects

Insertion Effects can be applied individually to each of specified parts before merging signals of all parts.
It should be used for sounds for which you want to drastically change the character. You can set different
Effect types to the Insertion Effects A and B for each Part. These settings can be made from Part Edit 
[Effect] (page 75, page 136,
This synthesizer features 13 sets of Insertion Effects. They can be applied to Parts1–8 and four of the Parts
9–16 and A/D Input Part.

Master Effect

This block applies effects to the final stereo output signal of the entire sound. Multiple Effect types are
available.
Element EQ
Element EQ is applied to each Element of the Normal Part (AWM2) and each key of the Drum Part. You can
specify one of three different EQ shapes, including shelving and peaking.
NOTE Element EQ does not affect the Input signals from the A/D INPUT [L/MONO]/[R] jacks.
Part EQ
This EQ is applied to a Part before and after the Insertion Effect.
parametric EQ
Master EQ
Master EQ is applied to the final (post-effect), overall sound of the instrument. In this EQ, all five bands can
be set to peaking, with shelving being available also for the lowest and highest bands.
MODX Reference Manual
page 150).
Part
3-band
Insertion Effect
Part EQ
2-band
parametric EQ
Part EQ
Basic Structure
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Motion Sequencer block
Effect block
Envelope Follower block
Controller block
Internal Memory
Reference
Display (touch panel) config.
Performance Play (Home)
Motion Control
Mixing
Scene
Play/Rec
Normal Part (AWM) Edit
Drum Part Edit
Normal Part (FM-X) Edit
Common/Audio Edit
Category Search
Utility
Live Set
iPhone/iPad connection
19