Yamaha MODX7 Reference Manual page 39

Reference
Performance
Part Name
Enters the desired name for the Part. Part names can contain up to 20 characters. Touching the
parameter calls up the input character display.
The parameters below are same as the ones when "Part" is set to "Common"
• FEG Atk (FEG Attack Time)
• FEG Decay (FEG Decay Time)
• FEG Rel (FEG Release Time)
• Cutoff
• Resonance
• FEG Depth
• Portamento (Portamento Time)
The setting values differ from the ones which "Part" is set to "Common."
Settings:
0–127
• Attack (AEG Attack Time)
• Decay (AEG Decay Time)
• Sustain (AEG Sustain Level)
• Release (AEG Release Time)
FEG Sus (FEG Sustain Level)
Determines the FEG Sustain Level for the Part. This is the offset value for the FEG Decay2 Level of the
Element/Operator Common
Settings:
-64 – +63
Edit Part EQ
Calls up the Part EQ display
Edit Part Arp (Edit Part Arpeggio)
Calls up the Arpeggio display
Edit Part MS (Edit Part Motion Sequencer)
Calls up the Motion Sequencer Lane display
EQ Low Gain (3 band EQ Low Gain)
Determines the level gain for the Low band.
Settings:
-12dB – +12dB
EQ Mid Freq (3 band EQ Mid Frequency)
Determines the frequency for the Mid band.
Settings:
139.7Hz–10.1kHz
EQ Mid Gain (3 band EQ Mid Gain)
Determines the level gain for the Mid band.
Settings:
-12dB – +12dB
EQ Mid Q (3 band EQ Mid Q)
Determines the EQ bandwidth of the Mid band.
Settings:
0.7–10.3
EQ High Gain (3 band EQ Hi Gain)
Determines the level gain of the High band.
Settings:
-12dB – +12dB
Pan
Determines the stereo pan position of the selected Part.
Settings:
L63–C (center)–R63
Var Send (Variation Send)
Determines the Send level of the signal sent to the Variation effect.
Settings:
0–127
MODX Reference Manual
Edit
(page 118).
(page 78) for Part Edit.
(page 82) for Part Edit.
(page 91) for Part Edit.
Search Utility
(page 35).
Live Set
Performance
Home
Motion Control
Overview
Quick Edit
Arpeggio
Motion Seq
Super Knob
Knob Auto
Mixing
Scene
Play / Rec
MIDI
Audio
39