Element Eq; Eq Type (Element Eq Type) - Yamaha MODX7 Reference Manual

Reference
Performance
Pitch Mod (LFO Pitch Modulation Depth)
Determines the amount (depth) by which the LFO waveform varies (modulates) the pitch of the sound.
Settings: 0–127
Filter Mod (LFO Filter Modulation Depth)
Determines the amount (depth) by which the LFO waveform varies (modulates) the Filter Cutoff frequency.
Settings: 0–127
Amp Mod (LFO Amplitude Modulation Depth)
Determines the amount (depth) by which the LFO waveform varies (modulates) the amplitude or volume of
the sound.
Settings: 0–127

Element EQ

From the Element EQ display you can make EQ related settings for each Element.
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Element selection  [Element EQ]
Operation

EQ Type (Element EQ Type)

Determines the Equalizer Type.
Settings:
2-band, P.EQ (Parametric EQ), Boost6 (boost 6dB), Boost12 (boost 12dB), Boost18 (boost 18dB), Thru
2-band: This is a "shelving" equalizer, which combines separate high and low frequency bands.
P.EQ: The Parametric EQ is used to attenuate or boost signal levels (gain) around the Frequency.
Boost6, Boost12, Boost18:
respectively
Thru: This setting bypasses the equalizers leaving the entire signal unaffected.
MODX Reference Manual
Edit
Normal Part (AWM2)
These can be used to boost the level of the entire signal by 6dB, 12dB and 18dB,
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
127