Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ubiquiti US-16-150W
Summary of Contents for Ubiquiti US-16-150W
- Page 1 Managed PoE+ Gigabit Switch with SFP Model: US-16-150W...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Switch. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms. Package Contents UniFi Switch US-16-150W Power Cord Rack-Mount Brackets Bracket Screws (Qty. 2) (M4, Qty. -
Page 3: Installation Requirements
We recommend that you protect your outdoor networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable, TOUGHCable , from Ubiquiti Networks. For more details, ™ visit: www.ubnt.com/toughcable Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure. -
Page 4: Network Topology Requirements
Controller v4.8.5 (or newer) software, located either on-site and connected to the same Layer 2 network, or off-site in a cloud or NOC UniFi Cloud Key (UniFi Controller) UAP-AC-PRO UAP-AC-LR UAP-IW UniFi Switch US-16-150W UniFi Security Gateway Pro (DHCP Server) CURRENT SITE REFRESH RATE Default 2 minutes DASHBOARD... -
Page 5: Hardware Overview
Hardware Overview Front Panel RJ45 1-16 SFP 1-2 Reset Button Port Description RJ45 ports support Power over Ethernet (PoE) RJ45 1-16 and 10/100/1000 Ethernet connections. Hot-swappable SF P ports support 1 Gbps SFP 1-2 connections. This button serves two functions for the UniFi Switch: •... - Page 6 Front Panel System LED System State Status White Factory defaults, waiting for integration. Flashing White Initializing. Device is busy; do not use or unplug it. Alternating This usually indicates that a process such White/Blue as a firmware upgrade is taking place. Successfully integrated into a network Blue and working properly.
- Page 7 Front Panel Port LEDs RJ45: RJ45: Speed/Link/Activity SFP: Speed/Link/Activity State Status No PoE Amber IEEE 802.3af/802.3at Green 24V Passive No Link Link Established at Speed/ 10/100 Mbps Amber Link/ Flashing Indicates Activity Activity Link Established at 1000 Mbps (1 Gbps) Green Flashing Indicates Activity No Link Speed/ Link/...
-
Page 8: Hardware Installation
Hardware Installation The UniFi Switch can be placed on a horizontal surface or mounted in a rack. Note: Keep a clearance of 20 mm next to the ventilation holes for adequate airflow. Mounting in a Rack (Optional) 1. Attach the Rack-Mount Brackets to the UniFi Switch using the eight Bracket Screws. -
Page 9: Connecting Power
Connecting Power 1. Connect the Power Cord to the Power port of the UniFi Switch. 2. Connect the other end of the Power Cord to a power outlet. -
Page 10: Connecting Ethernet
Connecting Ethernet 1. Connect the UniFi Cloud Key, management computer, or LAN running the UniFi Controller to the UniFi Switch. 2. Connect Ethernet cables from the gateway or router (DHCP server) and other devices to the UniFi Switch. - Page 11 Using SFP Ports To use an SFP port: 1. Remove the protective plug covering the SFP port. 2. Plug a compatible fiber module into the SFP port. 3. Connect the fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber device. For information about compatible fiber SFP modules, visit: community.ubnt.com/unifi...
-
Page 12: Software Installation
Software Installation Download and install the latest version of the UniFi Controller software at downloads.ubnt.com/unifi and follow the on-screen instructions. Note: If you already have UniFi Controller v4.8.5 or newer installed, skip to the section, Adopting the UniFi Switch. After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. - Page 13 Adopting the UniFi Switch 1. From the UniFi Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UniFi Switch in the list of devices under the Name/MAC Address column. To adopt the UniFi Switch, click Adopt. 3.
-
Page 14: Configuring Poe Settings
Configuring PoE Settings By default, PoE settings for ports 1-8 are set to auto-sensing PoE+. PoE will automatically be activated on the port when an 802.3af/at device is connected. For 24V passive PoE, PoE must be manually activated. WARNING: Before manually activating 24V passive PoE, ensure that the connected device supports 24V passive PoE. - Page 15 3. Click Actions for the port you want to configure. 4. Select the appropriate mode: Off, 24V Passive, or PoE+ from the PoE setting. Then click Apply. For more information, refer to the User Guide on the website: documentation.ubnt.com/unifi...
-
Page 16: Specifications
Specifications UniFi Switch US-16-150W Dimensions 443 x 43 x 221 mm (17.44 x 1.69 x 8.70") Weight 2.80 kg (6.17 lb) With Mount Brackets 2.89 kg (6.37 lb) Total Non-Blocking Line Rate 18 Gbps Max. Power Consumption 150W Power Method... -
Page 17: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 18: Limited Warranty
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;... -
Page 19: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. -
Page 20: Industry Canada
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. -
Page 21: Australia And New Zealand
Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. - Page 22 Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 23: Declaration Of Conformity
[German] Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις [Greek] βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ. -
Page 24: Online Resources
. u b n t . c o m ©2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCable, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.