Frymaster LOV BIGL30 Series Installation, Operation And Maintenance Manual page 23

3.1 Controller Operation and Programming
This fryer is equipped with a Manual LOV
™
LOV M3000 controllers should refer to the Manual LOV
the controller programming and operating procedure.
Refer to Chapter 4 of this manual for operating instructions for the built-in filtration system.
3.2 Equipment Setup and Start-Up Procedures
The on-site supervisor is responsible for ensuring that operators are made aware of
the inherent hazards of operating a hot oil filtering system, particularly the aspects
of oil filtration, draining and cleaning procedures.
The cooking oil capacity of the MANUAL LOV™ Series gas fryer is 32 lbs. (3.8
gallons/14.5 liters) at 70°F (21°C) for a full-vat.
Before lighting the fryer, make sure the fryer is OFF and the frypot drain valve(s)
is/are closed. Remove the basket support rack(s), if installed, and fill the frypot to
the bottom OIL-LEVEL line.
If solid shortening is being used, make sure it is packed down into the bottom of the
frypot.
3.2.1 Setup
Never operate this appliance with an empty frypot. The frypot must be filled with wa-
ter or oil before lighting the burners. Failure to do so will damage the frypot and may
cause a fire.
Remove all drops of water from the frypot before filling with oil. Failure to do so will
cause spattering of hot liquid when the oil is heated to cooking temperature.
™
M3000 controller (illustrated below). Fryers with Manual
™
MANUAL LOV M3000 CONTROLLER
WARNING
CAUTION
WARNING
DANGER
3-2
™
M3000 Controller Manual 819-6964 for