Avaya 9400 Series Installation And Maintenance Manual page 19

To upgrade the firmware, perform the following steps:
1. Log into the Avaya Aura Communication Manager administration interface.
2. Enter the change node-name ip command.
The Change Node Names screen appears.
3. Add the node name of your TFTP server in the Name field.
4. Add the IP address of your TFTP server in the IP address field.
5. Save your changes.
6. Copy the latest 9400 Series Digital Deskphones firmware that you downloaded from
http://www.avaya.com/support
7. Start your TFTP server.
8. Browse your firmware outbound and inbound file, and make sure your TFTP server is
running.
9. From the Avaya Aura Communication Manager administration interface, enter the change
tftp-server command.
The TFTP Server Configuration screen appears.
10. Perform one of the following steps:
- If you have a G650 system, enter the name of the CLAN in the Local Node Name field.
- If you have a G700/450/350 system, enter Procr in the Local Node Name field.
11. In the TFTP Server Node Name field, enter the name of the computer that is running the
TFTP server.
12. Make sure the TFTP Server Port field is set to 69.
13. In the File to Retrieve field, enter the boot file name (for example, boot94xxR018.bin). Be
sure to include the .bin suffix in the file name.
14. Save your changes.
15. In the File to Retrieve field, enter the firmware file name (for example, 94xxR19.bin). Be
sure to include the .bin suffix in the file name.
16. Save your changes.
17. If you are using a language file, enter the language file name (for example,
94xxlng_R18_v08_Pack01.bin) in the File to Retrieve field. Be sure to include the .bin
suffix in the file name.
18. Save your changes.
19. If you are using a font file, enter the font file name (for example, TradCh5.bin) in the File to
Retrieve field. Be sure to include the .bin suffix in the file name.
20. Save your changes.
Upgrading the Firmware and Other Files for 9400 Series Digital Deskphones
to your TFTP server.
Issue 1 August 2011 19