Appendix F: Programming the 3102 and 3105 using HART
February 2015
F.4.15
Pulses in use (D918)
Fast Keys
This is the actual number of pulses transmitted in the previous burst of pulses.
Note
The factory default setting is to automatically decide the number of pulses in a burst for
optimum performance (see Target Pulses on
Field Communicator or AMS Device
Manager
To view the number of pulses being used
in a burst
1.
2.
3.
4.
5.
6.
Note
This is also at the Fast Key sequence 2, 2, 7 [or 8], 5, 2
(see
Appendix E: Field Communicator Menus
Rosemount 3490 Series Control Unit
To view the number of pulses being used
in a burst
1.
2.
3.
4.
5.
6.
208
3, 1, 2, 3, 3
From the Home screen, select 3: Service Tools.
Select 1: Alerts.
Select 2: Diagnostic Data.
Select 3: Operation.
Select 3: Pulses In Use D918.
When finished, select EXIT to exit to the previous menu.
From the Main Menu screen, select MONITOR.
Select the transmitter (e.g. "Tx1: 3102").
Select DIAGNOSTICS.
Select OPERATION.
Select Pulses In Use.
When finished, use the ESC key to exit to the previous menu.
page
183).
Pulses in Use D918
10
HELP
(Field Communicator Screen Shown)
for a menu tree diagram).
Pulses in Use
(Rosemount 3491 Screen Shown)
Programming the 3102 and 3105 using HART
Reference Manual
00809-0100-4840, Rev CB
EXIT
D918
10