The Parameters Of The Ethernet Interface - Newtec MDM2210 User Manual

Modem Web Interface

4.7.1.2 The Parameters of the Ethernet Interface

The displayed parameters and their description:.
Ethernet
Parameter
Ethernet
Ethernet MAC address
Management IP address
Netmask
IPv4
Parameter
IPv4
NAT Enabled
LAN IP Address
DHCP v4 Range
WAN IP Address
MDM2210
Description
MAC address of the Ethernet interface
Management IP address of the Ethernet interface
Network range for the user's LAN
Description
Enable or disable the Network Address Translation.
NAT enables a LAN to use one set of IP addresses for internal
traffic and a second set of IP addresses for external traffic.
Next to translating IP addresses this function also performs port
translation.
Note: Enabling the NAT can be disabled by the Service Provider.
In such case, the NAT parameter is read-only.
This is the modems public IP address in case NAT is enabled.
The DHCP settings are only visible when NAT is enabled.
Enter an IP range from which the DHCP server can select IP
addresses.
When no range is specified, the complete range is available to
the DHCP server.
This is the public IP address towards the Service Provider.
User Manual R4.1 v1.0
/
31 71