Hold Reminder; Ring; Flash - RCA 21230 User Manual

INTERCOM TO #
L1: HOLD L2: MAIL
L1
TALK MM:SS

FLASH

OR
3. Press the PROGRAM/OK button to initiate an intercom call.
The display shows:
NOTE: Refer to the Intercom section of this manual for more information
on conducting intercom calls.

Hold Reminder

When an outside line holding, Hold reminder makes the system
wait for a predetermined period of time before it generates a
reminder tone.
Hold Recall Ring
If a call holds longer than three minutes, all registered handsets
generate a reminder tone, and HOLD shows in each display.
Press the LINE 1 or LINE 2 button on the handset or base to
pick up the call.
NOTE: If a holding call is not picked up within five minutes, the call is
disconnected.
Flash
Use the flash feature to activate custom calling services such as
call waiting or call forwarding, which are available through your
local phone company. If you subscribe to the combined Call
Waiting Caller ID service from your local telephone company,
you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call, you will hear a beep to
indicate another call is waiting on the line and Caller ID
information for the waiting call shows on the handset display. To
connect to the waiting call:
1. Press the FLASH/EXIT button when you hear the call-waiting
tone in the handset receiver. Your original call is
automatically placed on hold. The display shows:
2. Answer the incoming call.
3. To return to the original call press the FLASH/EXIT button
again. Or you may switch back and forth between the two
calls by pressing the flash button.
NOTE: The flash function does not affect the call timer. The timer counts
continuously after the Flash feature is activated.
Telephone Operation
31