Emory; Irectory Memory - RCA 21230 User Manual

L1 11:55 2/01 CALL
PM
1-135-922-5123
JOHN SMITH
MEMO
REPLACE RECORD?
NO?
1. Press the REDIAL/FORMAT button to select the telephone
number format.
2. Press the L1 or L2 button, and the number is automatically
dialed.
NOTE:
1. When you change the dialing format of a displayed number, you do
not change the Caller ID database.
2. If the line is busy when you presses [LINE 1 or LINE 2] key, the phone
won't dial the number.
3. If the displayed number's area code is NOT the same as the
programmed area code, the system automatically adds the number 1 to
the dialing sequence.
Transferring A CID Record To Directory Memory
If you want to store the CID record showing in the display in
memory:
1. Press the REDIAL/FORMAT button. The display shows:
#15
2. Press the REDIAL/FORMAT button to select the format you
want to store the number in.
3. After you select the dialing format, press and hold the DIR
button to enter directory memory.
4. Press the
enter the memory location number.
5. Press the PROGRAM/OK button to confirm. The display
#14
shows:
6. Press the
PROGRAM/OK to save. You will hear confirmation tone.
NOTE:
If the memory location is empty, REPLACE RECORD does not show in the
display and the telephone number is automatically stored. A Caller ID
record must contain a telephone number; otherwise it cannot be stored
in directory memory.
Telephone Operation
or button, or use the touch-tone pad to
or button to scroll to YES, and press
47