Data Port; Handset Registration; Base - RCA 21230 User Manual

Connections and Set Up
REGISTRATION
RESET
REGISTRATION
NO?
REGISTRATION
YES?
TO REGISTER PUT
HANDSET IN BASE
14

Data Port

The base is equipped with two data jacks for you to connect an
auxiliary phone device, such as fax machine, computer modem,
or even another phone.

Handset Registration

All cordless handsets used with this unit must be registered at
the base. You may register up to eight cordless handsets. The
model number of the optional cordless handsets is H1230RE3-A.
To order additional cordless handsets, contact your dealer or call
1-800-511-3180 to locate a dealer.
The cordless handset packed with this unit is preregistered by the
manufacturer and is assigned as handset number one. The
handset number is also used as the extension number. Only one
additional handset may be registered at a time. You must
complete the handset registration process within 30 seconds.

Base

The base must be in standby mode during the registration
process.
1. Enter the registration mode on the base.
2. Press the PROGRAM button.
3. Use the / button to scroll to REGISTRATION.
4. Press OK (PROGRAM button). The display shows:
NOTE: To exit the registration mode, press OK again.
5. Press the / button to scroll to YES? The display shows:
6. Press the OK button to confirm. The display shows:
NOTE: The base remains in registration mode for 30 seconds, and the
display slowly flashes.