DE-REGISTER
NO?
DE-REGISTER
YES?
DE-REGISTER PUT
HANDSET IN BASE
DE-REGISTER
REGISTRATION
DE-REGISTER
HANDSET #1?
4. Press PROGRAM/OK again. The display shows:
5. Use the
/
button to select YES? or NO?
NOTE: If you select NO, the display returns to the previous mode.
6. Press PROGRAM/OK to confirm and save. The display shows:
When the handset is de-registered, the display shows:
NOTE:
The base does not need to be in de-registration mode to de-register a
handset.
You may register the handset to another base without de-registering
from the original base. The original base, however, retains the handset
information forever.
For more information, refer to the Registration or Installation section of
this manual.
Base De-Registration
You may de-register a single handset or all handsets from the
base.
1. Make sure the base if OFF (not in use).
2. Move the handset(s) close to the base.
3. Press the PROGRAM/OK button.
4. Use the
/
button to select DE-REGISTER.
5. Press PROGRAM/OK again. The display shows:
Connections and Set Up
25