Volume Adjust; Hold; Transfer; Privacy - RCA 25413RE3 User Manual

Volume Adjust

Adjust the receiver volume by pressing the Volume Up/Down button
(located at the side of the handset) when you are in talk mode. There
are four volume levels, and each press of the Volume Up/Down button
adjusts the receiver volume by one level.

Hold

Press the HOLD button to put a call on hold.
To take a call off hold, press the HOLD button again.
To switch a call on hold from the base to the cordless handset, press
the HOLD button on the cordless handset.

Transfer

You can transfer the call to another extension.
1. Press the TRANSFER button when it is in TALK mode.
2. Key in the extension ID number you want to transfer to.
3. The desired extension will ring, and your handset will go back to
standby mode.

Privacy

When you are using the phone, if you want to secure the line, press
the PRIVACY button. Then, the line you are using cannot be picked up
by another extension in the system.

Flash

Use the FLASH/EXIT button on the handset to activate custom calling
services such as call waiting or call transfer, which are available
through your local phone company.
TIP: Don't use the TALK button to activate custom calling service such
as call waiting, or you'll hang up the phone.

Manual Channel Selection

While talking, you might need to manually change the channel in
order to reduce static caused by baby monitors, garage door openers,
or other cordless phones. Press and release the Channel/Delete button
on the cordless handset to advance to the next clear channel.

Call Timer

After you press TALK or LINE plus number button to select the line on
the cordless handset, the built-in call timer shows in the display and
begins counting the length of time of the call.

Ringer On/Off Switch

Use the two-position switch on the cordless handset to turn the ringer
volume off or on.
Telelphone Operation
11