services such as call waiting or call transfer, which are available
through your local phone company.
TIP: Don't use the TALK button to activate custom calling service such
as call waiting, or you'll hang up the phone.
To quickly redial the last number you dialed:
1. Press TALK button.
2. Press the redial button.
To take a call off hold, press the hold button again.
To switch a call on hold from the base to the cordless
If you continue the call on a separate extension phone, your
cordless phone releases the line to the extension phone.
This feature helps you locate a misplaced handset.
Press the PAGE button once on the base (25413/25414/25415),
then press number 0 button. The cordless handset will beep
continuously (if it is not out of range) for 2 minutes or until you
press any button on the handset.
NOTE: You may still page the cordless handset even if the ringer is
Adjust the receiver volume by pressing the
button (located at the side of the handset) when you are in talk
There are four volume levels, and each press of the
button adjusts the receiver volume by one level.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the INT button, and the display will show SELECT
PHONE ID .
3. Press the number button to input the phone ID you want to
intercom with. For example, to intercom with extension 2, you
need to input "0", "2".
4. When finished, press the INT or TALK button to end up the
NOTE: To cancel the intercom call, press INTERCOM.
1. Press the
2. When finished, press the
on the handset to activate custom calling
button to put a call on hold.
on the cordless handset.