Table of Contents
Advertisement
NEW CID: XX
ALL CID: YY
NEW CID: 00
ALL CID: 00
NO LINK TO BASE
TRY AGAIN!
3. Press the
or
The display shows new and repeated call information and the
index number.
NOTE: If you try to access the CID database while another user is
accessing the CID Database, the display shows SYSTEM BUSY.
Caller ID Display Icons
L1 or L2 - LINE 1 or LINE 2; indicates the telephone line in use.
CALL# – Indicates the index number for the Caller ID record.
NEW – Indicates a new Caller ID record is received.
REPT – Indicates the call record was received at least twice on
the same date. The REPT and CALL #counter information may
only be displayed in through the Caller ID database.
0/00 –Indicates the month and date range.
00:00AM or PM – Indicates the hour range from 00-23 (12AM-
11AM, 12PM-11PM) and the minute range (00-59).
Reviewing CID Records
As calls are received and stored, you may access the CID database
to review the records.
1. Make sure your phone is OFF (not in use).
2. Press the CID button to enter the Caller ID database. The
display shows the amount of new CID records received and
the total number of CID records received. For example, the
database may have 12 new caller ID records and 36 total
caller ID records.
3. Use the
or
button to scroll though the records. If the
database is empty, the display shows:
NOTE: The Caller ID database uses the same path as the intercom, so the
display shows SYSTEM BUSY if you try to make an intercom call while
reviewing the Caller ID database. If you experience interference from
other wireless equipment or you move out of range of the base when
accessing the Caller ID database, your display shows:
Telephone Operation
button to scroll through the CID database.
45
Advertisement
Table of Contents
