Notes On Use; Control Part And Indicator Part; Control Switch/Indicator Lamp During Charging/Indicator Lamp During Operation - Hitachi PV-XEH900 Instruction Manual

Notes on use

To prevent malfunctions, etc., follow the directions below.
Also, for proper use, please read the
 Do not subject the body, the power head, extension pipe, charging
station, or attachment accessories to strong physical shock.
Doing so might cause deformation or damage.
 Do not vacuum the following objects.
Failure to do so might cause abnormal odors or malfunctions.
· Water or liquids · Wet objects · Desiccants (moisture absorbents)
· Large amounts of sand or powder · Long threads · Glass

Control part and indicator part

Control switch
To operate
Press the or
For careful carpet cleaning
For normal cleaning
The LED lights of the body, power head,
and smart hose turn on.
→ (P.E-2, E-3)
Indicator lamp during charging
Battery indicator lamp
Note
thoroughly.
button.
Control switch
Battery indicator lamp
* When the battery indicator lamp quickly flashes (about four times
per second), there is a problem with the charging station or battery.
→ (P.E-37 )
* If you remove the body from the charging station while the battery
indicator lamp is off and then set it on the charging station again, the
battery indicator lamp will turn on, which is normal.
* If you remove the battery while charging, after a short time, the
indicator lamp flashes (about four times per second). Remove the
body from the charging station, fully attach the battery, and set the
body in the charging station again.
 Do not ride on the body, power head, or the charging station.
Doing so might cause malfunctions.
 Thoroughly air dry parts washed with water.
Failure to do so might cause abnormal odors or malfunctions.
 Do not remove the battery while the cleaner is
operating or while it is set in the charging station.
Doing so might cause malfunctions.
To stop operation
Press the
To stop rotating the rotary brush
When you press and hold the
5 seconds or more during operation, the
operating rotary brush stops. To resume,
press and hold the
or more.
* When the rotating rotary brush stops, the LED
lights for the power head turn off.
The battery is charging.
Charge time is approx. 3.5 hours. Depending on
the ambient temperature, usage time, and other
On
usage conditions, if the battery's temperature is
very hot, charging may automatically go into
standby until the temperature lowers to an
appropriate temperature for charging, causing
the charging time to increase.
Charging is complete (fully charged).
Off
When charging is complete, it turns off.
button.
button for
button for 5 seconds
Charging status
E-9